Fixed Iron Sights Set Backup Front and Rear Sight Combo Set for Picatinny Wea-ver Rail Mount (Black)
$32.99
Related Products
Product description
Non-Rust Hard Anodized Finish
Adopting high-density exquisite aluminum alloy material makes the sight sturdy, the sight can be used normally under harsh conditions.
Dual Aiming Aperture
The backup iron sight of dual apertures design for switch between CQB and Precision, perfect for short and long distance. With the scale mark on the rear sight, you can rotate the knob for a proper aiming position by simple windage adjustment.
More Accurate
A pair of iron sights on the rear aperture on the front sight post speed up acquisition and help obtain a correct sight picture by lining them up horizontally.
✪Especially designed for any hunting or picatinny rail or wea-ver rail mount including winchester, remington, colt, etc.
✪Jimtyee iron sights made of extremely light and durable aluminum, non-rust black anodized finish,eusuring a longer life, Lightweight & solid safe performance.
✪The fixed rear sight of dual apertures design for switch between CQB and Precision, comes with the windage and elevation adjustment option, perfect for short and long distance.
✪Calibrated and matched together as a set of front and rear sights, designed for same plane with low profile rear sight .
✪Package includes 1 x front iron sight, 1 x rear iron sight. Satisfaction with you is our primary goal, any question or problem about this fixed sights set, please contact us, we will reply in time and help you solve the problem within 24 hours!
8 reviews for Fixed Iron Sights Set Backup Front and Rear Sight Combo Set for Picatinny Wea-ver Rail Mount (Black)
Add a review
$32.99
Amazon Customer –
Great?!
Can’t beat the price, seem to be built well, not as nice as actual Daniel defense but to the untrained eye they work
Aaron –
Doesn’t tighten, wobbly, screws strip immediately.
Please do NOT purchase these. The entire design is flawed and doesn’t replicate any usable fixed iron sight. There is no “clamping” effect possible on these, therefore is never engages the rail. The screw doesn’t tighten either side, and the sight remains wobbly. Screws stripped immediately when trying to remove, and had to drill it out, therefore damaging a brand new rail. Absolute garbage waste of money.
Matt –
Daniel Defense fixed sights
The sights are good quality, well made, and easy to install.
Raymond M. Nees –
Decent sights with a little minor modification.
First off they have Daniel Defense logos on them and they are most certainly not. They are a Chineseium knock off. The larger rear peep hole is too small but i remedied this by taking a 3/16 drill bit to it and enlarging the peeps diameter to the correct diameter and used a black sharpie to color the bare aluminum inside the peep… But given those issues they are decently made for the price. They do need to be torgued quite tightly to the rail, and I suggest a little blue loctite. Some reviews say they will not work on their picatanny rails. I tried several different rifles and was able to secure them to the rails. The trick is you have to really torque them tightly, but be careful the screw is cheap and could strip easily. Would be best to find a replacement screw of better quality honestly. But it does work. I measured the height and they are of the correct height of 1.5 inch above the rail. And the adjustments are solid and have a solid click inbetween each adjustment. Compared to the price of the actual Daniel defense sights like these and with the minor modification I made I must say I am pleased. I am giving 3 stars because of the things I mentioned above and I have nit feild tested their reliability yet. But at the same time they do have potential and through mknor modification was able to make it right. We will see as time goes on how we’ll they hold up
Brent B –
Exact DD clone, crap screws, quality sight.
The legit Daniel Defense sights are still better but I also have these and I’m not disappointed. Especially for the price point. I had issues with the screws stripping out so I replaced them with grade 8 Allen head screws from the tool room and they work beautifully for a fraction of the cost. They hold zero and allow for precise shots (as good as irons can do. I was brought up on irons.) I am slightly bothered by the cloning of the authentic Daniel Defense sights though. They’ve cloned them and undercut them and that does bother me but the authentic sights, I feel are massively overpriced. So I think they kind of had it coming. I did swap the ring and point for trijicon tritiums (something I’d have liked during my time overseas). Fit perfectly.Only thing I’d recommend is that you put a quality bolt in before installation unless you’re NEVER going to remove them.
apostlex –
Fixed clone Daniel Defense Sights
Wow..very nice I am impressed and will probably purchase and set, after I dial them in.Nice finish..light weight…looks 👍
Mule –
Very much junk
Zero stars, complete junk. Bought them for an airsoft training/larping rifle and won’t tighten to the rail, screw holes aren’t even drilled straight and the Daniel Defense ripoff markings kinda seal the deal. Spend your 30 bucks on pull tabs or 15 Powerball #s instead.
R. Muxlow –
Look great, but don’t fit
I read the reviews, but still figured I’d try them…but the reviews were right, the clamp spacing is too wide, they won’t secure to a Picatinny rail. I put a hefty amount of torque on the screw, and it was still quite loose, so I didn’t try to get insane with it. They are also 1/8″ or so lower than standard AR eye height, but I didn’t get around to checking sight picture. It’s a shame, because they are very good looking, well-made devices, just not to Pic spec.